Step-by-step walkthroughs — do a real task in the app, with a screenshot for every step.
How do I turn a spreadsheet of failure times into a fitted reliability model?
Open guide →How do I show a colleague my analysis, or work on it as a team?
Open guide →How do I set up a shared workspace where colleagues can see and work on the same models?
Open guide →How do I include units that are still running, or failed between inspections?
Open guide →How long until 10% have failed, and how sure can I be?
Open guide →My units fail in several different ways. Which mode matters most, and when?
Open guide →Is the new supplier, design or site really better, or is the difference just luck?
Open guide →How much do temperature, load or duty change how long my equipment lasts?
Open guide →My relief valve has to open when called on. How reliable is it per demand?
Open guide →How do I use high-stress test data to predict life at normal operating conditions?
Open guide →How do I tell whether a fleet is getting better or worse over time?
Open guide →How do I turn wear or degradation readings into a remaining-life prediction?
Open guide →Which of my running units is most likely to fail next, given its vibration (or wear, or oil) readings?
Open guide →How do I model a system of components and get its overall reliability?
Open guide →I already have this system drawn in another tool or a spreadsheet. How do I bring it into Reliafy?
Open guide →How do I build a repairable reliability block diagram and read its availability?
Open guide →How do I couple redundant components that share a failure cause?
Open guide →How do I model redundant units that share a load, where survivors get stressed?
Open guide →How do I check that a safety instrumented function reaches its SIL?
Open guide →My system must reach 99% at 500 hours: what does each block need, and where should the redundancy go?
Open guide →My system needs different equipment at different stages of a mission: how likely is the whole mission to succeed?
Open guide →One inverter of four is down: the plant is 'up', but how much output am I losing?
Open guide →What does this system cost to own, how often should we service it, and which change saves the most?
Open guide →I have a log of real outages. What availability did the system actually achieve, and does my diagram agree?
Open guide →How reliable is the connection between two points of a pipeline, grid or communications network, where flow can go either way?
Open guide →How often should I replace this component to minimise cost?
Open guide →Does my model meet B10 ≥ 500 hours at 90% confidence, and if not, what test would show it?
Open guide →How many failures will my fleet see next year, and how many spares should I hold?
Open guide →How often should I test a protective device whose failure I can't see until it's needed?
Open guide →How do I record failure modes, choose a maintenance task for each, and show the analysis behind it?
Open guide →